# Trigger Settings from V2 to V3 **URL:** \ **Category:** V3 SOFTWARE\ **Created:** [July 23, 2024, 2:36pm UTC](https://community.ecumaster.com/t/trigger-settings-from-v2-to-v3/1888 "2024-07-23T14:36:48Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![jmichael15](https://avatars.discourse-cdn.com/v4/letter/j/8491ac/32.png) [@jmichael15](https://community.ecumaster.com/u/jmichael15)\ **Post date:** [July 23, 2024, 2:36pm UTC](https://community.ecumaster.com/t/trigger-settings-from-v2-to-v3/1888/1 "2024-07-23T14:36:49Z")
Do the trigger settings translate over from V2 to V3 exactly the same? See attachment of my V2 settings and V3 settings for triggers. Mainly worried about the CAM2. Is Prim Trig Tooth Range now Primary Teeth Window correct? ![v2-settings](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/f/f3f696f6c8a6ff6be0fa418b021f672ce5800561.png) ![v3-settings](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/7/7792e7bf84fa9c712a7cd85fcc144b828ae0895e.png) ---
**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\ **Post date:** [July 23, 2024, 8:59pm UTC](https://community.ecumaster.com/t/trigger-settings-from-v2-to-v3/1888/2 "2024-07-23T20:59:36Z")
Please post scope from V3 I will advice according CAM #2 ---
**Author:** ![jmichael15](https://avatars.discourse-cdn.com/v4/letter/j/8491ac/32.png) [@jmichael15](https://community.ecumaster.com/u/jmichael15)\ **Post date:** [August 8, 2024, 6:43pm UTC](https://community.ecumaster.com/t/trigger-settings-from-v2-to-v3/1888/3 "2024-08-08T18:43:16Z")
Attached is my cranking scope from V3 software. Can you advise for CAM #2 settings? Thanks [scope\_202488\_1334.emubscp3](https://community.ecumaster.com/uploads/short-url/pkG5qZWYWhvZ6TW51125KyatOkm.emubscp3) (607 Bytes)