# User defined CAN data from ADU to EMU not being recieved properly

**URL:** <https://community.ecumaster.com/t/user-defined-can-data-from-adu-to-emu-not-being-recieved-properly/3439>\
**Category:** EMU BLACK / CLASSIC\
**Created:** [March 28, 2025, 6:50pm UTC](https://community.ecumaster.com/t/user-defined-can-data-from-adu-to-emu-not-being-recieved-properly/3439 "2025-03-28T18:50:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![k420\_racing](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@k420\_racing](https://community.ecumaster.com/u/k420_racing)\
**Post date:** [March 28, 2025, 6:50pm UTC](https://community.ecumaster.com/t/user-defined-can-data-from-adu-to-emu-not-being-recieved-properly/3439/1 "2025-03-28T18:50:53Z")

</div>

I am trying to send oil pressure from an analogue sensor connected to my ADU to my EMU black. The light client shows the correct value “05” (x0785 channel, 8 bit unsigned, DLC 1) is being sent.

(Note the correct value is being displayed on the ADU)

I have configured a user defined CAN stream in the black to recieve data on the same channel, same DLC with 8 bit unsigned assigned to “CAN analogue 8 channel”. The oil pressure sensor input is set to the same channel, but the value is remaining at 0.

Has anyone done something similar, or could help explain what I’ve missed?

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/9/95490198d0ced452a8093b203ac85b1a87e10801.jpeg)

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/6/6200fd7ed5cced1a984a99b875cdfd4f6e648568.jpeg)

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/a/af6feecc98f200f330e11068c247ae3b57b85c2a.jpeg)

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/f/fb3e9ff6ff0d51caba59315a89298d5126a64a46.jpeg)

---

<div class="post-metadata">

**Author:** ![Jan\_Matlag\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jan_matlag_ecumaster/32/1466_2.png) [@Jan\_Matlag\_ECUMASTER](https://community.ecumaster.com/u/Jan_Matlag_ECUMASTER)\
**Post date:** [March 28, 2025, 10:59pm UTC](https://community.ecumaster.com/t/user-defined-can-data-from-adu-to-emu-not-being-recieved-properly/3439/2 "2025-03-28T22:59:19Z")

</div>

You can use in the ADU: “adu.A1.voltage” “\*51”  
It will change 0-5V into 8-bit values: 0-255.

NOTE: A1 used in the above example refers to “Analog 1” input. Please change it.

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/f/f5ec4460922f3d0089489bffa9708d95e37da6c0.png)

---

<div class="post-metadata">

**Author:** ![k420\_racing](https://avatars.discourse-cdn.com/v4/letter/k/e480ec/32.png) [@k420\_racing](https://community.ecumaster.com/u/k420_racing)\
**Post date:** [March 29, 2025, 3:29pm UTC](https://community.ecumaster.com/t/user-defined-can-data-from-adu-to-emu-not-being-recieved-properly/3439/3 "2025-03-29T15:29:16Z")

</div>

Thank you! After some tweaking of the voltage table for the oil temp sensor and your suggested adu canbus export suggestions, everything is working as expect 👏 🙇‍♂️

Sharing the results for others 🤓

ADU

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/9/9250820af5e007e4a260bae4374c7fa9947b9b36.jpeg)

EMU BLACK

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/d/de4ff635d10e985798ac7cd6552c3a3f5a5c460d.jpeg)

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/b/b499976da331d35dd606959af4fc4b41a305cb80.jpeg)

---

<div class="post-metadata">

**Author:** ![Jan\_Matlag\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jan_matlag_ecumaster/32/1466_2.png) [@Jan\_Matlag\_ECUMASTER](https://community.ecumaster.com/u/Jan_Matlag_ECUMASTER)\
**Post date:** [March 29, 2025, 7:33pm UTC](https://community.ecumaster.com/t/user-defined-can-data-from-adu-to-emu-not-being-recieved-properly/3439/4 "2025-03-29T19:33:28Z")

</div>

Great!

Thank you for sharing with others.