# V3.044 DBW setup

**URL:** <https://community.ecumaster.com/t/v3-044-dbw-setup/3189>\
**Category:** V3 SOFTWARE\
**Created:** [February 12, 2025, 8:44am UTC](https://community.ecumaster.com/t/v3-044-dbw-setup/3189 "2025-02-12T08:44:27Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Runeson](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/runeson/32/2857_2.png) [@Runeson](https://community.ecumaster.com/u/Runeson)\
**Post date:** [February 12, 2025, 8:44am UTC](https://community.ecumaster.com/t/v3-044-dbw-setup/3189/1 "2025-02-12T08:44:27Z")

</div>

Hello!

I updated to 3.044 yesterday. I started as sugested here, with a blank project. Setting up everything from scratch. Everything worked fine! V3 is great. But i can’t seem to find how to assign Pot1 and Pot2 for DBW.

I use a tps on the oem pedal, on V2 firmware that was assigned as TPS. But if i understand it right that signal now should be PPS? And pot1 and 2 from dbw is TPS?

---

<div class="post-metadata">

**Author:** ![Frantisek](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/frantisek/32/62_2.png) [@Frantisek](https://community.ecumaster.com/u/Frantisek)\
**Post date:** [February 12, 2025, 9:19am UTC](https://community.ecumaster.com/t/v3-044-dbw-setup/3189/2 "2025-02-12T09:19:43Z")

</div>

It’s described here.

> [@1,8t AGU DBW setup problem](https://community.ecumaster.com/t/1-8t-agu-dbw-setup-problem/1185):
>
> Hello Guys, I have a problem with my DBW. Analog 1 and 2 is my TPS. As soon as i hit DBW autotune i get following problem. It’s probably something small but I don’t see it. in V2 the setup worked this way: Please help. Thanks

---

<div class="post-metadata">

**Author:** ![Stroedi](https://avatars.discourse-cdn.com/v4/letter/s/db5fbb/32.png) [@Stroedi](https://community.ecumaster.com/u/Stroedi)\
**Post date:** [March 10, 2025, 5:58am UTC](https://community.ecumaster.com/t/v3-044-dbw-setup/3189/3 "2025-03-10T05:58:15Z")

</div>

Hey guys,  
My DBW calibration Tool dont work.  
Ford MK2 rs

[20250310\_0644.emublog3](https://community.ecumaster.com/uploads/short-url/eaXiWZfeC8Uo0EqrbJBf0JSAVt0.emublog3) (500.0 KB)  
[jan V3.emub3](https://community.ecumaster.com/uploads/short-url/vgknBHOKr9O54f1zw5CxczDLGdi.emub3) (62.9 KB)

Analog 1+2 are the DBW inputs

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/4/4e0cb5aa3537052cd1d2a50286af9730a17d5bc4.png)

I hope somebody can help me

---

<div class="post-metadata">

**Author:** ![Dabrowsky94](https://avatars.discourse-cdn.com/v4/letter/d/7ab992/32.png) [@Dabrowsky94](https://community.ecumaster.com/u/Dabrowsky94)\
**Post date:** [March 13, 2025, 5:20pm UTC](https://community.ecumaster.com/t/v3-044-dbw-setup/3189/4 "2025-03-13T17:20:50Z")

</div>

Your sensor assignment is off. Throttle position sensors are assigned to pedal position sensor.  
You should have ain 1 and ain 2 assigned in TPS setup, and TPS main signal input in PPS setup. Can be confusing.