# V3 Switchboard / Steering Wheel

**URL:** <https://community.ecumaster.com/t/v3-switchboard-steering-wheel/1386>\
**Category:** V3 SOFTWARE\
**Created:** [May 13, 2024, 3:07pm UTC](https://community.ecumaster.com/t/v3-switchboard-steering-wheel/1386 "2024-05-13T15:07:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Benrebuilds](https://avatars.discourse-cdn.com/v4/letter/b/5f9b8f/32.png) [@Benrebuilds](https://community.ecumaster.com/u/Benrebuilds)\
**Post date:** [May 13, 2024, 3:07pm UTC](https://community.ecumaster.com/t/v3-switchboard-steering-wheel/1386/1 "2024-05-13T15:07:54Z")

</div>

I am currently looking at buying the new steering wheel CAN module and have a MCE18 CAN bus exansion module to emulate the V3 Switchboard

is there a way i can use some of the outputs on both, some for steering wheel buttons on the wireless steering wheel module and the MCE18 to run sensors via can ?

It looks to me like there is only the option to use 1 V3 so not sure if this will clash.

I will be running the car on V3 EMU software only not V2

Thanks  
Ben

---

<div class="post-metadata">

**Author:** ![Jadzwin\_ECUMASTER](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/jadzwin_ecumaster/32/28_2.png) [@Jadzwin\_ECUMASTER](https://community.ecumaster.com/u/Jadzwin_ECUMASTER)\
**Post date:** [May 13, 2024, 3:52pm UTC](https://community.ecumaster.com/t/v3-switchboard-steering-wheel/1386/2 "2024-05-13T15:52:12Z")

</div>

Yo can change ID for steering wheel module and receive data using custom string in emu black.