# Version 3.059 Release Candidate #2

**URL:** <https://community.ecumaster.com/t/version-3-059-release-candidate-2/4711>\
**Category:** V3 SOFTWARE\
**Created:** [November 9, 2025, 10:00pm UTC](https://community.ecumaster.com/t/version-3-059-release-candidate-2/4711 "2025-11-09T22:00:47Z")\
**Posts on this page:** 1\
**Showing post:** 25

<div class="post-metadata">

**Author:** ![tombate911](https://avatars.discourse-cdn.com/v4/letter/t/ecb155/32.png) [@tombate911](https://community.ecumaster.com/u/tombate911)\
**Post date:** [November 17, 2025, 10:25pm UTC](https://community.ecumaster.com/t/version-3-059-release-candidate-2/4711/25 "2025-11-17T22:25:46Z")

</div>

Wanted the check the following is correct, I noticed when I lift of the PPS 100% to 0% the DBW is being taken from the Idle, where I thought it would be taken from the DBW table until the conditions for idle are met.

I realise that this is possible because in the Overrun settings I do not have the override dbw section selected.

However in idle parameters Idle is only on if Map over 25kpa.

I have added in some Overun DBW %’s now, which has also made me notice there is no overrun fuel, just complete fuel cut, what % fuel cut is normal?

 ![Screenshot 2025-11-16 170623](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/0/0fee82fd46fe3b3521d28ce7dc8e216745545ddc.png)

[Oulton Park Log 2025.emublog3](https://community.ecumaster.com/uploads/short-url/dApfqBmS8u0yx2ru0nm2RWAWRL6.emublog3) (1.2 MB)

[E46 V3 EFI 7.6 Oulton.emub3](https://community.ecumaster.com/uploads/short-url/ucg59P9RGr5NfzY9b0S2uehAW1A.emub3) (69.3 KB)

---

_[View the full topic](https://community.ecumaster.com/t/version-3-059-release-candidate-2/4711)._