# VQ35HR Trigger Sync configuration

**URL:** https://community.ecumaster.com/t/vq35hr-trigger-sync-configuration/3334
**Category:** EMU PRO
**Created:** [March 11, 2025, 2:22pm UTC](https://community.ecumaster.com/t/vq35hr-trigger-sync-configuration/3334 "2025-03-11T14:22:52Z")
**Posts on this page:** 1
**Showing post:** 7

<div class="post-metadata">

### Author: ![Ratbert](https://avatars.discourse-cdn.com/v4/letter/r/43a26b/32.png) [@Ratbert](https://community.ecumaster.com/u/Ratbert)
#### Post date: [March 11, 2025, 5:38pm UTC](https://community.ecumaster.com/t/vq35hr-trigger-sync-configuration/3334/7 "2025-03-11T17:38:49Z")

</div>

If I use the bank 1 (pass) cam for the secondary sync, am I labeling everything correctly according to the description for “Longer than factor” ?

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/8/8a3d56d6f2c97fb2625a84659a8acdb2ccd4e54c.png)

and then, if so, since the space between DT and PrevDT aren’t aligned should I instead configure it with a factor of 3 so it is like this with a 310\* offset?

 ![image](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/7/7e7340b058c0ec6716eaee67a455ac286bdab9c2.png)

---

_[View the full topic](https://community.ecumaster.com/t/vq35hr-trigger-sync-configuration/3334)._