# Whell speed sensor

**URL:** <https://community.ecumaster.com/t/whell-speed-sensor/1151>\
**Category:** ADU\
**Created:** [April 18, 2024, 8:06pm UTC](https://community.ecumaster.com/t/whell-speed-sensor/1151 "2024-04-18T20:06:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![remus](https://avatars.discourse-cdn.com/v4/letter/r/b2d939/32.png) [@remus](https://community.ecumaster.com/u/remus)\
**Post date:** [April 18, 2024, 8:06pm UTC](https://community.ecumaster.com/t/whell-speed-sensor/1151/1 "2024-04-18T20:06:44Z")

</div>

just to be sure, according to adu manual, vr sensor could be connected to digital in 1-8, using the appropriate pull-up.  
After that, using math could calculate vehicle speed and send it also to can.

I need to wire my wheel speed sensors.

---

<div class="post-metadata">

**Author:** ![FloorItGarage](https://dub1.discourse-cdn.com/flex013/user_avatar/community.ecumaster.com/flooritgarage/32/61_2.png) [@FloorItGarage](https://community.ecumaster.com/u/FloorItGarage)\
**Post date:** [April 19, 2024, 5:25am UTC](https://community.ecumaster.com/t/whell-speed-sensor/1151/2 "2024-04-19T05:25:26Z")

</div>

VR sensors do not need pull ups.  
Otherwise yes
