# Where should the EGT sensor be placed relative to the knock sensor

**URL:** https://community.ecumaster.com/t/where-should-the-egt-sensor-be-placed-relative-to-the-knock-sensor/6038
**Category:** GENERAL
**Created:** [June 17, 2026, 10:52am UTC](https://community.ecumaster.com/t/where-should-the-egt-sensor-be-placed-relative-to-the-knock-sensor/6038 "2026-06-17T10:52:39Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Cubas2001](https://avatars.discourse-cdn.com/v4/letter/c/a183cd/32.png) [@Cubas2001](https://community.ecumaster.com/u/Cubas2001)
#### Post date: [June 17, 2026, 10:52am UTC](https://community.ecumaster.com/t/where-should-the-egt-sensor-be-placed-relative-to-the-knock-sensor/6038/1 "2026-06-17T10:52:39Z")

</div>

Hi everyone,

But in the wiring, the EGT sensor go near knock sensor,etc or go outsider of them? Thanks

---

<div class="post-metadata">

### Author: ![essess](https://avatars.discourse-cdn.com/v4/letter/e/d9b06d/32.png) [@essess](https://community.ecumaster.com/u/essess)
#### Post date: [June 17, 2026, 12:38pm UTC](https://community.ecumaster.com/t/where-should-the-egt-sensor-be-placed-relative-to-the-knock-sensor/6038/2 "2026-06-17T12:38:20Z")

</div>

They are unrelated.  
Could you show a picture of what you’re trying to achieve?

---

<div class="post-metadata">

### Author: ![Cubas2001](https://avatars.discourse-cdn.com/v4/letter/c/a183cd/32.png) [@Cubas2001](https://community.ecumaster.com/u/Cubas2001)
#### Post date: [June 17, 2026, 12:41pm UTC](https://community.ecumaster.com/t/where-should-the-egt-sensor-be-placed-relative-to-the-knock-sensor/6038/3 "2026-06-17T12:41:01Z")

</div>

I realise a 1.4 T-Jet wiring and the EGT sensor have 2 wires with 2 tips