# Wireless Racing Steering Wheel Kit CANX Import Errors into ADU

**URL:** <https://community.ecumaster.com/t/wireless-racing-steering-wheel-kit-canx-import-errors-into-adu/6500>\
**Category:** OTHER DEVICES\
**Created:** [September 13, 2026, 8:05pm UTC](https://community.ecumaster.com/t/wireless-racing-steering-wheel-kit-canx-import-errors-into-adu/6500 "2026-09-13T20:05:42Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![peterguk](https://avatars.discourse-cdn.com/v4/letter/p/c4cdca/32.png) [@peterguk](https://community.ecumaster.com/u/peterguk)\
**Post date:** [September 13, 2026, 8:05pm UTC](https://community.ecumaster.com/t/wireless-racing-steering-wheel-kit-canx-import-errors-into-adu/6500/1 "2026-09-13T20:05:42Z")

</div>

Device loads and works fine in Light Client. Switches and rotary controls respond correctly.

Firmware shows as both 3.0.

Tried to add CANX file in ADU. Receive 2 or 3 errors as shown in photos. Switches do not respond.

Same messages received when deleting from ADU.

Any ideas?

 ![WSWK error 1](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/2/2254c7f275cc9c638ab8e9ec09747da6826285aa.jpeg)

 ![WSWK error 2](https://europe1.discourse-cdn.com/flex013/uploads/ecumaster/original/2X/3/357ba7ae4bfb186eb3d6c66f0857e2275201d289.jpeg)

---

<div class="post-metadata">

**Author:** ![peterguk](https://avatars.discourse-cdn.com/v4/letter/p/c4cdca/32.png) [@peterguk](https://community.ecumaster.com/u/peterguk)\
**Post date:** [September 13, 2026, 9:51pm UTC](https://community.ecumaster.com/t/wireless-racing-steering-wheel-kit-canx-import-errors-into-adu/6500/2 "2026-09-13T21:51:12Z")

</div>

Found the answer - remove all channels that are not needed from logging.

---

<div class="post-metadata">

**Author:** ![kaihp](https://avatars.discourse-cdn.com/v4/letter/k/4bbf92/32.png) [@kaihp](https://community.ecumaster.com/u/kaihp)\
**Post date:** [September 14, 2026, 5:47am UTC](https://community.ecumaster.com/t/wireless-racing-steering-wheel-kit-canx-import-errors-into-adu/6500/3 "2026-09-14T05:47:46Z")

</div>

By default, the configuration includes several PMUs which I can recommend to remove (I think it also contains an EMU black). If you don’t aggressively prune the default configuration about 650 bytes out of the 1024 are already used.