ADU switches transmitted via CAN BUS to the EMU Black

ADU
1

Hi, I would like to use buttons on the Emu Black connected to the analogue inputs of the ADU using the CANBUS line. It’s possible? what should I configure on the ADU and what on the Emu? Thanks for your help

2

Hi,
You can mimic the PMU standard stream at ID 0x66B.
This frame contains 8 analog values in the raw range 0…255 (0V…5V).
Values will automatically appear in the BLACK as CAN Analog #1 - #8.

ADU:
image

1 Like