I have brake pressure sensors on both front and rear brake lines, I was thinking I could display the brake bias on the ADU using the data from the sensors. Has anyone done this? Whats the best way to go about it?

there will be new paned dedicated brake bias and you will need to select brake pressure front and rear pressure channel and bias will be calculated… this update will be this week I believe

wait couple of days there will be ready settings for it in new software .

Have you got any information you can share on what we can expect?

Hi There, I’ve installed 104.1 but I can’t see the option for brake bias. Did it get included in this release?

We need a few more days to validate the new experimental release, so we are planning to release it at the beginning of next week.

Setup is in “Configuration” panel just to be clear

This works perfectly! Exactly what I wanted. Good work thanks to all at ecumaster for this feature.

We previously developed this using about 5-6 different numbers and functions., so this allowed us to remove all those variable/names. I just updated and compared and found that it is identical to what we previously had with one exception. Our code would go to 0 when no pressure was applied, while t…

“Industry standard” about brake bias is displayn Front brake bias so 100 is 0 rear brake bias… Is you swap channers in configuration you will have rear bias. Minimum pressire in configuration is used for setting bias number to 0 when brake is not applied

Displaying Brake Bias

ADU

mfudala_ECUMASTER September 3, 2024, 10:20am 8

Hi!

Brake Bias is now available in ADU 105.0-exp
New ADU software version 105.0-exp

Topic		Replies	Views
Holding brake bias value ADU	5	135	September 5, 2025
Brake pressure value for brake light activation? ADU	4	110	February 13, 2026
New ADU software version 105.0-exp ADU update	4	216	April 18, 2025
Bi-directional bar gauge ADU	1	75	March 26, 2025
New ADU software version 111.0 ADU update	0	129	April 29, 2025

Displaying Brake Bias

Related topics