We appreciate the valuable contributions from everyone who helped improve this version. We’re proud to announce the new EMU PRO 214.0 beta software update. This update brings multiple improvements: Improvements: Simplified configuration of the second high-pressure pump Enhanced scope graph visu…

Regarding the dq500 PQ35 issue I’ve done another 50km of daily tests and the DSG part is fine now. But every new USB log is flagged as having “corrupted data” after the update. I noticed that logs still open if you load the GDI log example first. It throws an error but the log is there and valid …

Thank you for the update. Please attach some of your “corrupted” log files. We will check. [image] allihov: also. EMU PRO client hangs every time I reconnect to my ECU without clearing the log. It has always been like that for me. Please have a look. Both of my laptops are affected Did the …

Hi, Will Bosch HDEV 5.2 DI are supported ? B48B20 BMW engine prelift. Datasheet suggest that is not piezoelectric injector. am I right? https://www.bosch-motorsport.com/content/downloads/Raceparts/en-GB/49510539208591115.html#/Tabs=9007199304263179/

Hi @DanielK ! Bosch HDEV 5.2 are electromagnetic injectors and they are supported.

20250102_1526_24.emuprolog (1.7 MB) that’s startup CL and a couple of revs. Big logs don’t fit here [image] regarding the Crashes. It’s more of a hang - it gets completely unresponsive so I have to force close the app. So It’s not caught by the bugtrap. As if it tries to add the lost time to t…

And maybe there’s some P\N of PULS oil level sensor I can use? I have 2 Hella level/temp sensors from 2 different Honda vehicles (k20c1 and j35a8) and one random VAG Hella sensor that don’t work. Different protocol apparently [image]

Yes, the speed of each of the four wheels is sent to the CAN bus separately.

I’ll confirm part number and come back to you next week

Please send us additional logs and share them via a Dropbox or Google Drive link. The log you previously sent appear to be broken in an unusual way. We need to review more logs to verify whether the issue is consistent across all of them.

Possible to add an input for cold junction thermocouple correction? I’m aware there’s a sensor for that internal to the Pro’s but I prefer to make the cold junction at a bulkhead connector and use an analog input for an rtd sensor to compensate. I typically use CAN based thermocouple amps for this …

New EMU PRO software version 214.0 beta with GDI support

EMU PRO

Jan_Matlag_ECUMASTER January 10, 2025, 7:19pm 15

We’ve just released the 215.0-rc1 software with the bugfix. Thank you for reporting the issue.

Topic		Replies	Views
New EMU PRO software version 215.0 Release Candidate RC1 with GDI support EMU PRO update	1	192	January 11, 2025
New EMU PRO software version 212.0 beta with GDI support EMU PRO update , how-to , wiring , document , important	11	602	January 10, 2025
New EMU PRO software version 225.1 Public Release EMU PRO update , document	10	523	March 23, 2026
New EMU PRO software version 230.5 beta EMU PRO update , how-to , document	9	282	April 10, 2026
Official Launch of EMU PRO with GDI Support and the New GDI Driver EMU PRO update , how-to , wiring , document , gdi	2	346	February 7, 2025

New EMU PRO software version 214.0 beta with GDI support

Related topics