New version of V3 is available! Link to the software: https://www.ecumaster.com/files/EMU_BLACK_V3/EMUBlackV3Setup_3_050a.exe EDL firmware ver 19 required for V3 firmware in version 3.049 and higer [ https://www.ecumaster.com/files/EMU_BLACK_V3/edl_firmware_1_19.zip ] Change log file: changeLog…

Please let me know. I also posted in the ‘OTHER DEVICE’ category, but many of the SD cards used with the EDL-1 are incompatible, so I don’t know how to choose. I bought two 8G SDHC cards and one 4G microSD + adapter like the one that came with it, but none of them work. The 8G SDHC has two red li…

Hi @Jadzwin_ECUMASTER yes the AC does work with tacho signal. But it looks like i already have something in on analog 4. Because in the logs before i changed anything it is showing voltage and if i rev the car the voltage changes. I just want to confirm. The issue was not that that the aircon did n…

Im still struggling to get good idle, i moved from dbw to idle valve control, now it more stable, but now of big idle dc changes with high pids i getting lean spots is there a idle % rate fuel adder? idle high pids.emublog3 (26.5 KB) idle53.emub3 (72.8 KB)

hi i had the same issues. i tried many different cards and they did not work so end up buying a new edl to take out the sd card . i now have a spare edl. i still dont know why is so hard to get the correct sd card @Jadzwin_ECUMASTER can you please advise on this error ?

Please contact your local ecumaster dealer. We have good cost effective cards that are verified and works perfect. The problem is that modern sd cards are not compatible with sierial protocol and behaves oddly.

I’ve made a small tutorial how to set up idle control [image] Idle control - HOW TO V3 BETA TESTS Many people have problems to set up idle control. Here is a guide how to do it step by step. Remeber PID is only for fine tuning, the VE table (stable lambda) and Active sta…

Could you make some pictures of the cards that dont work for you ? We will try to buy them and check why dont work.

All of these don’t work. SanDisk’s SDHC 8G also didn’t work, but I don’t have it here so I couldn’t get a photo of the model number. I understand that SD memory is an industrial product and that some will have defects, but none of the ones I bought work properly so I decided to post this. If you …

I don’t think it is the memory card. Have you tried to format it in fat32 [image]

Most SD cards are formatted in FAT32, and this is also the case for these. However, I have tried formatting them many times. I have also tried changing the allocation size and formatting them. Is there anything else I can try?

New software 3.050 available!

V3 SOFTWARE

Jadzwin_ECUMASTER June 6, 2025, 9:30pm 43

I’ve made a small tutorial how to set up idle control

2 Likes

Topic		Replies	Views
New software 3.043 available! V3 SOFTWARE	79	4293	June 13, 2025
New software 3.049 available! V3 SOFTWARE	38	1061	June 2, 2025
New software 3.047 available! V3 SOFTWARE	186	4301	July 29, 2025
Version 3.063 BETA V3 SOFTWARE	74	3205	April 15, 2026
New software 3.053 available! V3 SOFTWARE	89	3494	August 29, 2025

New software 3.050 available!

Related topics