Porsche 964 Base Tune

Hi

I’m building a Porsche 964 engine with ITB’s and I’m using a ECUmaster Classic. I was hoping that someone here might have a base tune file for a Porsche 964 that I can start with, rather than trying to start from scratch?

A Classic or Black series file is ok as this will give me something to work with.

Any assistance would be really appreciated, thanks.

Scott

What other things than ITB is different than stock? I might help, if you give more details.

1 Like

Hi Konrad, thanks.

The engine will have a fabspeed exhaust, thats basically it.

Even just a base 964 file/map would be a massive help with the triggers and base running settings.

Thanks again

This was for a 3.8 with dbw and cop, I highly suggest upgrading your ignition system to double fire coils like BERU ZSE013 (can use stock ignitioin leads) forexample if its your own car as a simple and cheap upgrade

New dbw.emub (145.3 KB)

I should have classic tune used with coil packs in wasted spark configuration with VarioRam induction and hotter cams.

Also black V3, but CoP and full sync. But this is still not sorted out fully for idle / warm up.

I’ll take a look and try to find those.

1 Like

3.6L-VarioRam-HotCams-WastedSpark-CoilPack.emu.zip (11.9 KB)

HTH (Hope That Helps) - EMU Classic tune with as close to OE setup I have.

Bear in mind VarioRam changes IGN/Fuel requirements a lot compared with OE TB or ITBs.

Use at your own risk :smiley:

1 Like

Sorry I’ve been away, thanks for all the help!