Just upgraded to v3 and have spent time comparing my v2 tune but can’t seem to find my issue getting the car to start. But ive also tried some other v3 tunes that have been uploaded and still nothing. My v2 tune wasn’t dialed in yet in but it would start so it’s not an issue with the car. If anyone can point me in the right direction i would really appreciate it.
This is what ive been working with
firstattempt.emub3 (70.1 KB)
and this is my start able v2
04allroad.emub (145.4 KB)
what is the firing order of that engine ?
1 4 3 6 2 5 ??
it is diferent in these files.
also secondary trigger is not he same chose 1 tooth if u use 1 tooth
try this.emub3 (70.5 KB) but be carefull changed starting fuel and ignition phase from wasted spark to sequential,i have it set in my audi a6 c5 with 2.7 and its working,and secondary trigger from pulldown to pullup,i dont use cam 2 in my tune you can try,and ingition trigger from 56 to 54,you can try to change it back if its not working,also i advice you do dbw calibration before you try to start it first in v3
firing order looks right in my v3 on my end but the trigger was wrong, thank you for catching that.
Edit: I see what’s wrong, I was looking at the tab that showed firing order but not taking the actual outputs into account. I’ll see if that helps.
awesome, thank you for giving me more things to compare too. i did catch that the dbw wasnt set right initialy but even after changing it i still wasnt having any luck. ill play with things based on the advice you and kimbaku have given me and report back, thank you.