New software 3.022 is available!
Due to the change in the size and structure of the VVTi maps, unfortunately, they need to be transferred manually between projects.
An ethanol content correction table has been introduced due to the variability in gasoline density across different seasons and manufacturers. The fuel model for variable ethanol fuels is still undergoing testing.
Due to the fact that currestrong textntly the majority of fuels contain ethanol, the fuel model allows for two options: Gasoline + ethanol fixed content, where the user manually enters the ethanol content of the fuel being used (e.g., in the EU, for 98 octane gasoline it should be 5%, while for 95 octane it can be up to 10%), or Gasoline + flex fuel.
If you are not currently using a flex fuel sensor but plan to do so in the future, it is crucial to create a base VE map for the correct ethanol content in the fuel. Otherwise, after installing the flex fuel sensor, the fuel dosage will not be accurate.
Link to the software:
https://www.ecumaster.com/files/EMU_BLACK_V3/EMUBlackV3Setup_3_023b.exe
EDL firmware
https://www.ecumaster.com/files/EMU_BLACK_V3/edl_firmware_1_14.zip
Change log:
- VVTI tables size changes, VVTi angle bins are assigned only for VVTi tables
- Warmup enrichment tables size increased
- Rolling start
- Pre throttle boost
- Cruise control change step
- Blending of warmup lambda correction bug fixed
- Password protection dialog Cancel button issue fixed
- WBO help updated base on confidential Bosch documents (we’ve got permission from bosch to publish that part of document).
- Tables and parameters windows naming convention changed. Now the prefix is the table / paramblock parent not a group parent.
- Short term PID fixed point coefficients scale change
- PID kP I kI scale table changed (0 means no correction) and the range increased (-100 to 1000%)
- Marker on Rotary switch calibration tables fixed
- Marker on Pit limiter tables (Rotary switch dependent fixed)
- CAN Rotary switches from can switch board fixed
- Marker on rotary switch dependent tables in TC strategy fixed
- Rx of CAN 29bits ID bug fixed
- When wheel speed source was user can, there was no possible to receive some channels via user can. Fixed.
- SHort term could be enabled during acceleration enrichment
- Fule composition has only 2 modes (Gasoline + fixed ethanol, Gasoline + ethanol flexfuel). By default the fixed ethanol content is 5% but it should be adjusted to the used fuel type
- Ethanol correction is now a table. The characteristic is based on gasoline density 0.72587 g/ml
- Subaru 6/7 trigger added
- Help added for the all sport strategies except Differential controller (will be updated in next release)
- INJ Outputs log channel
- Assigned outputs display outputs from Functions
- Assigned inputs display inputs from Functions
- Functions names bug fixed
- Knock sensor sampling bug fixed