V3 studio 3.070 [LATEST VERSION]

V3 SOFTWARE
1

There is a new software version with new basemaps, features and bug fixes.

Lots of GUI improvements!

More information can be found in the change log.

V3StudioSetup_3_070.exe

EDL firmware 1.30

GUI

  • Child window appearance updated with smaller borders and title bars

  • Child window maximization behavior improved

  • Minimize button removed from child windows

  • Tree view chevrons are now visible for expanded groups

LAUNCH CONTROL

  • Per-injector fuel cut mode added.

SCOPE

  • Incorrect cylinder TDC marker positioning fixed.

  • Angular width added to the selected area parameters.

BASE MAPS

  • EMU CLASSIC BMW M50B20NV base map added, compatible with the ECUMASTER BMW M50B25 DME 3.1 interconnector

  • EMU CLASSIC Lexus IS200 1G-FE base map added

  • EMU BLACK Lexus IS200 1G-FE base map added

WBO

  • Incorrect AFR display for lean mixtures fixed.

CAN BUS

  • Issue affecting Renault Megane RS, Clio 3 RS, VW MQB and VW ABS emulation when the EMU CAN stream was active fixed.

DSG

  • “Enable start only on N and P” option added.

FLAT SHIFT

  • Disable input added.

AC

  • Minimum and maximum AC pressure parameters are now ignored when no analog input is assigned to the AC pressure sensor.

IDLE

  • CLT correction added for inactive state airflow.

ALS

  • Activation PPS can now be set to 0%.

  • Maximum duration extended to 25 seconds.

Nitrous

  • Fixed a bug in the dry progressive system when “If TPS released” was set to “Continue with throttle pressed”.

EMU BLACK

  • User-defined debounce times added for internal switches (Switch 1–3).

OTHER

  • Knock count added as a custom table axis.

  • Nitrous help section restored.

3

New GUI:

image
image2077Ă—1380 336 KB

Old one:

image
image2081Ă—1379 306 KB

4

@Jadzwin_ECUMASTER the new gui ROCKS!!!

5

For awareness, I installed v3.070 on a couple of Classics today. Both were running 3.069 previously. On both upgrades, I got a “Datafile Corrupted” message after each first attempted install. I simply hit the Upgrade Firmware button again and both installed correctly on the second attempts.

6

Data corrupted is informarion about your calibration data. You need to load you calibration manually.

7

Now it looks finished. . .

What about password protection for calibration file? :wink:

8

Log zoom in zoom out on cursor is good.

9

Navigating in the log window has become much smoother! Like it :smiley: