CAM Sync1 with VR sensor

V3 BETA TESTS
1

scope_2024430_1711.emubscp3 (596 Bytes)
Cross posting, as initially I posted on the info 3.025 is available.

I have problem with VR CAM Sync 1 - it does not appear in the scope function of the Softoware.
The signal is there (B38/B39 and B21 connected probes in my scope).

IMG_6855
IMG_68551170×1234 251 KB

scope-v3
scope-v31189×616 22.5 KB

Tried with Pull down 1k and 4k7 no filters.

Any hints?

2

But I can see the signal on EMU scope so EMU reads the signal.
I’m not sure if I understand the issue

3

Seems I’m to impatient and did not rev the engine long enough to have 2+ full turns of the crank?

And missed the blue line at the 302deg?

Sorry xD