hi yes the car was manual before and fitted dsg on a stock ecu and every thing worked fine .
I have tried this coding but still the abs gives a error.
so the ecu is wired with a plug and play loom with the 1.8t base map with v2 i used to have the can switch 8 working with the esp button. and also the Air con system when switched on will show via the can system and i used it for idle up with AC on . i am struggling to reconfigure this if you can point me in the correct direction .
“[According gearshift and cut, it looks very very suspicious for me.
I can see on the log that something is wrong with the spark when the ignition is retarded]” > So let me just be sure we are on the same understanding .>when the car is Drive mode . > pic in red to show setting in question
{upshift num spark cut to
upshift spark cut min rpm to
upshift spark cut min tps } > this maps are only supposed to be used with sport and manual mode or (drive as-well ?) my understanding is that when in drive they is not supposed to be retarding the timing when changing gears ? am i correct to say so ?.
(so remember my issues is when in drive mode the ignition cut is always active )
many thanks look forward to hearing from you