Please enter your opinions here, what you like, what you don’t like, suggestions for improvements, etc.

In theory the Above VSS RPM increase should solve this issue. When you start moving the vss is higher than 0 and target increases.

Nah, i tried bad feeling, and that first torque is not there, also when clutch partially connected there is rpm bump what makes things worse. Also i dont see a way to invert clutch position, i using oem ecu clutch sensor signal from e90.

I was going to suggest this idea a while back when tuning idle control Very helpful moving car around garage and loading trailer. My VW Tiguan has the same when the clutch is depressed on idle get a bump of RPM and car can be moved easier with less throttle input.

ok guys. I will add it for next build.

Just got access to the V3 software and it looks to have some great changes. However, when migrating my file from V2, I noticed it’s missing VE blending. Please bring a way of doing that back. I understand the theory behind ethanol correction, previously called ethanol fuel scale, but in my experien…

[image] Flex Fuel VE Table Switching V3 BETA TESTS Hi guys, Just wondering how we go about enabling table switching on the new V3 firmware. From what I can find in the Tables Switching menu, VE doesn’t have a flex fuel option. Is there a new way to set this up? Or is it a…

you can use also clcustom correction table and set one of the axis to ethanol contnent. Nobyou can for example to use VTEC and two separate VE tables + Flex fuel.

Custom correction tables will be very annoying to tune and implement being only 3D. VE blending is the 4th dimension needed to do this reliably and simply. Nothing in tuning is ideal or perfect, and is often very far from it on customer cars. You sometimes have to tune for effect, and blending VE i…

Ok, I add VE blending for version 3.040 as an option.

Thank you! Regarding pre-throttle pressure as y-axis for DBW characteristic, do you think that’s a possibility?

Software opinions

V3 SOFTWARE

J2performance October 27, 2024, 9:27am 613

this is the new replacement for VE blending

hope this helps

Topic		Replies	Views
New software 3.047 available! V3 SOFTWARE	185	5046	July 29, 2025
Version 3.063 BETA V3 SOFTWARE	74	3809	April 18, 2026
Version 3.060, Release candidate V3 SOFTWARE	49	2228	January 15, 2026
New software 3.043 available! V3 SOFTWARE	79	4675	June 13, 2025
New software 3.057 available! - new "fast" rev limiters, launch control, rolling start V3 SOFTWARE	100	4076	October 31, 2025

Software opinions

Related topics