Hey Guys, Can Someone explain What is meant in Emu Software With vag torque ? For What is This value and What is the effect by changing it from 400 to 600Nm. I hope someone can help, have a good one:) I got only 13bar clutch pressure and in vcds the torque doesnt Show More than 410Nm doesnt matte…

I have the same problem the DTC is in ABS/Cluster/Steering Coloumn/ Central electric 01314 - Engine Control Module 008 - No Signal/Communication

Hi Keybo, did you swap from manual to DSG or what is your setup? Do anyone know what the differences are in the type of DSG? For example DQ250 Audi S3 8P and DQ250 VW Golf 5 R32. Maybe Ecumaster has some differences in protocol or something like this? My donor car for the DSG Gearbox was a Pass…

My car is a 2007 TT 8J original DQ250. I am also confused about this problem. It has not been solved yet.

Hi Keybo, do you only have the fault codes or do you get some other symptoms with these fault codes? In my case my electric steering doesnt shut off, so i can easy turn my steering wheel with ignition off. I hope someone can help us with that problem.

Yes, it’s the same situation. The light on the instrument bothers me a lot. It doesn’t seem to appear with any regularity.

Is your problem solved? It seems that he has the same problem. [image] EMU Black - ABS Coding in CAN setup EMU BLACK / CLASSIC Howdy ECU Master peeps. I have a 2010 2.0TSI 4motion Tiguan with a VW Passat BWS R36 turbo’d engine swap running a EMU Black ECU. I am trying t…

Hi, Problem is not solved…Still have the 2 lights on the dash boards. I am sure its to do with the EMU Black Vehicle can not set correctly. Also not sure if it matters but my car has a manual transmit and its always been a manual.

EMU Black - ABS Coding in CAN setup The codes in VCDS are, ABS Module Hardware :- 5N0 614 109 M 01314 - Engine Control Module 000 - - 01044 - Control Module Incorrectly Coded 000 The errors i have in VCDS are, ABS Module Hardware :- 5N0 614 109 M 01314 - Engine Control Module 000 - - 01044…

Hi Apow, i cant figure out what the problem is. In manual i didnt had problems. I am thinking about to switch to Maxxecu. The only problem in manual state was that the haldex had sometime a fault. I dont know the Code anymore but it says no communication to ECU and the traction control light com…

Hi AlexJo174, My problem is that the my car was originally a Manual car i swapped the engine out to. The only components that have been changed on the vehicle are the engine (For a VW R36), gearbox from a Diesel Tiguan and the ECU which is a EMU Black. Everything works fine apart from the ABS, Au…

Dq250 dsg cxx vr6turbo

EMU BLACK / CLASSIC

keybo February 20, 2024, 5:38am 11

Is your problem solved? It seems that he has the same problem.

Topic		Replies	Views
VAG MDI torque on DSG DQ250 EMU BLACK / CLASSIC	1	405	November 10, 2024
Version 3.063 BETA V3 SOFTWARE	74	3904	April 18, 2026
New software 3.043 available! V3 SOFTWARE	79	4725	June 13, 2025
EMU Black - ABS Coding in CAN setup EMU BLACK / CLASSIC	8	1507	July 17, 2024
Emu black dsg problem EMU BLACK / CLASSIC	11	1304	September 5, 2024

Dq250 dsg cxx vr6turbo

Related topics