Hey guys I am spending some time converting as much as I can from v2 to v3, And I noticed when trying to input my DBW settings theres no option for pos inv input Maybe im confused as the menus are just different, do we now only need 1 pos lead? Also, I have my AC condenser fan ran through paramet…

Maybe the guide can help to set it up. (See also answers before this post) [image] 1,8t AGU DBW setup problem V3 SOFTWARE Bosch 0 280 750 009: Ok. To get this thread closed I will post the summary, that was found with help of the different people above. Thank …

Please read the help for DBW and for TPS and PPS settings. Then if something will be unclear for you please ask the question. It also helps us to improve the Help.

Okay great so nothing to worry about then, I have not yet uploaded the v3 to the car I have been trying to convert as much as possible before I do so. would a scope in v2 be just as useful? The only things holding me back currently is setting up the idle pid’s, boost pid’s and ACC enrichment chan…

This is my current v2 map Current new fuel map.emub (145.3 KB)

The scope from V3 will show if your configuration is correct. It is much more complex than scope in V2 and shows many information like ignition events, fuel injection, etc.

Can you still please explain how I’m supposed to run the functions with the parameters for my fuel pump and fan? Cheers

They are the same as v2 [image]

No I meant using functions menu as a replacement for parametric output. But I think I figured it out now [IMG_7438]

Hey guys. Trying to get this on the car and now have a weird issue PPS is set to analog 5/6 When I’m on v2 they read fine. I upload v3 my 5/6 ain shows zero changes. The V are stuck at .86 for 5 and 3.88 for 6 I went back to v2 and they are fine. Checked the input selections everything is how i…

And for some reason the function control is set to come on at greater than 33psi map is at 12.5 but can’t get the function to turn off It’s just stuck on. [IMG_7446]

check the tps status log channel. i suppouse your check table is set wrong. for the begining you can just set main pps input and left check input unassigned. According funcion I assume the imperial uints dont work and it still evaluate it as metric.

DBW set up/ and functions options

V3 SOFTWARE

Werwolf25565 June 26, 2024, 9:57pm 24

Maybe the guide can help to set it up. (See also answers before this post)

Topic		Replies	Views
V3.044 DBW setup V3 SOFTWARE	3	436	March 13, 2025
V2 vs v3 DBW settings V3 SOFTWARE	3	187	July 10, 2024
DBW issues with tuning evo 8 V3 SOFTWARE	31	470	November 13, 2024
1,8t AGU DBW setup problem V3 SOFTWARE how-to	36	1242	April 27, 2024
DBW woes. Worked in prev version but not in V3 V3 SOFTWARE	15	451	January 22, 2026

DBW set up/ and functions options

Related topics